Yuho O2 FRP (Factory Reset Protection) File Firmware

Share:

Yuho O2 FRP (Factory Reset Protection)
On this post, you will find Yuho O2 FRP (Factory Reset Protection) lock issue we found a solution to Yuho O2 bypass FRP Unlock, follow the below guide step by step to Unlock Yuho O2 FRP lock from your device even without using any Gsm Devices, This is the latest Bypass FRP Yuho O2.
FRP is (Factory Reset Protection) for our Latest Android devices if you forget the Pattern, Password and fingerprint lock for this you have to hard reset your device by using manual volume, power keys, after hard reset your device then you need to enter the previously synced Gmail ID to using your access your device,if we forget the Gmail ID that we enter synced previously on our device, 

then you need to Yuho O2 bypass FRP (Factory Reset Protection) and use our device once again.that all 

System Info: "YUHO O2 
-Model: YUHO_O2
-Brand: YUHO
-Version: Android 8.1.0 
-CPU Type: MediaTek MT6739
-Id:YUHO_O2_V1.0_20180725
-Manufacturer: YUHO
-RAM: 2GB
-ROM: 16GB

-File Size: 43.5MB

Download Yuho O2 bypass FRP File 
File Name: Yuho O2 FRP Lock Remove File_Mobilecare107.com
How to Flash: Follow 
File Download: [ Click start to Download ]
File Type: zip
Zip Password: www.mobilecare107.com

How to Flash 
- Download File, extracted  to Yuho O2 FRP Lock Remove File_Mobilecare107.com zip in your pc,
- Now find there “SP Flash Tool.exe”, Then run the “SP Flash tool.exe” from there.
- After that, Click on” Download Agent” tab, and give the file path of the ‘Download Agent” file (it should be in the flash tool folder) and then press “Open” button.
- Then click on the” Scatter-loading”, then give the file path of “MT6739 MTK Scatter” file (File should be in the Flash file) folder and press the “Open”.
- Now go to the “Format” tab by click on the “Format” icon.
- Then check the “Manual Format” from there.
- Open FRP Format Address.
Begin Address field > 0x2d88000 
Format Length field > 0x100000 
- Now press Star option 
- Devices Must be power switch off  then Device connect to pc 
Now click start button flashing will start note: Don't remove the USB cable

- Wait a few second flashing will take process success after if not auto-reboot than Press power key Reboot Manually.






No comments